|Frame:||Bronson 2 CC Full Carbon|
|Fork:||FOX 36 F150 Factory Kashima - 27.5|
|Rear Shock:||Fox Float Factory DPX Kashima|
|Headset:||Cane Creek 10 ZS Headset|
|Rear Hub:||Hope Pro 4 - 12x148mm, 32h (XD)|
|Front Hub:||Hope Pro 4 - 15x110mm, 32h|
|Rims:||WTB ASYM TCS i29 - 27.5|
|Tyres:||Maxxis Minion DHF 3C EXO TR - 27.5x2.3"|
|Shift Levers:||SRAM XX1 Eagle 12 speed|
|Rear Derailleur:||SRAM XX1 Eagle 12 speed|
|Cassette:||SRAM XG1295 Eagle 10-50t|
|Chain:||SRAM XX1 Eagle 12 speed|
|Crankset:||SRAM XX1 Eagle Carbon 32t - 175mm (M,L,XL)|
|Seat post:||KS LEV Integra with Southpaw|
|Saddle:||WTB Volt Race|
|Handlebar:||Santa Cruz AM Carbon Bar - 35x800mm|
|Grips:||Santa Cruz Palmdale lock-on|
|Brakes:||SRAM Guide Ultimate|
|Brake Levers:||SRAM Guide Ultimate|
When we introduced Bronson, it took the market by storm, redefining what people expected from a 150mm trail bike.
Equally at home in the Trans-Provence as it was on The Ridge, updating and improving it was going to be no small feat.
The most visible upgrade is the completely new VPP link arrangement. The lower link tucks neatly above the bottom bracket, fully-recessed and protected from impacts. Meanwhile the box-section upper link now mounts cleanly to the top- tube and enhances lateral stiffness as a result.
Shock rate has been in refined in the process too, delivering greater small bump sensitivity and a more progressive mid-stroke.
Geometry has also evolved subtly to meet demand from riders for a bike of this ilk. The seat tube angle has been steepened, placing the rider right above the cranks and perfectly in position to lay down the power. Meanwhile a one-degree slacker 66 degree head tube angle combines with a 20-25mm longer top tube and shorter chainstay length to create an evermore rally-ready geometry than its predecessor.
148mm Rear Axle Spacing
Full carbon frame and swingarm
150mm (6") VPP suspension
27.5 inch wheels
Double sealed pivots for long bearing life
Full carbon dropouts and disk mounts
Angular contact bearings maximize stiffness
Collet axle pivots lock in place without pinch bolts
Bottle cage mount within front triangle fits piggyback shocks
Molded rubber swingarm and downtube protection
Stealth and external seatpost cable routing
Threaded Bottom Bracket
ISCG-05 tabs for chainguide compatibility
Direct mount rear derailleur option
Buy your Santa Cruz Bronson 2 CC, XX1 2018 from C6 Bikes.
Price: £ 6700.00
Price: £ 6899.00
Price: £ 6399.00